DIY PS5 Controller Charging Station – How to Build Your Own

With the release of the PS5 gaming console, gamers are now seeking ways to enhance their gaming experience even further. One of the critical components that make playing games an enjoyable experience is the PS5 controller. However, the downside is that the factory charging station is short-lived and expensive to replace.

Summary:

But hey, why waste money on something you can easily build yourself! In this article, we will guide you on how to make your DIY PS5 controller charging station. Not only will it save you money, but you can also customize it according to your preferences.

What is a PS5 Controller Charging Station?

Before we dive deep into how to build the charging station, let's define what it is. A PS5 controller charging station is a device that charges and stores PS5 controllers when not in use. It acts as a stand for the controllers and offers more convenience than charging the controllers through the USB cable that comes with them.

Materials needed

To build your charging station, you will need the following materials:

• Wood
• Sandpaper
• Saw
• Drill
• Paint and Brush
• 2 USB Charging Cables (The same used for charging the controller)
• USB Hub with at least two USB charging ports

Step-by-Step Guide on How to Build Your PS5 Controller Charging Station

Now that we have gathered all the NEEDED materials let's dive into the actual process of making your charging station.

Step 1: Measure and Cut the Woods

Use your saw to measure and cut your wood into the proper lengths. You will need 1 wood piece for the base, one wood piece for the back that has the same length as the base, and two wood pieces for the sides that have the same length and height. Sanding the wood pieces before cutting them is the wise move to avoid violence.

Step 2: Drill the Holes

Drill two holes in one wooden side piece for the USB cable to go through. The other wooden side piece needs a drilled hole for the USB hub.

Step 3: Combine the Wooden Pieces

Align the wooden pieces together following the base, back and two side pieces, and assemble them with screws. Be sure to pre-drill the holes for the screws to avoid cracks in the wood.

Step 4: Paint the Wooden Frame

Take your chosen color of paint and paint the wooden frame to your liking. If it's your thing to do it.

Step 5: Installing the USB Charging Cables

Take the two USB charging cables and insert one into the drilled hole in one side of the wooden frame. The other cable should be connected to the USB hub.

Step 6: Install the USB Hub

Attach the USB hub to the other side of the wooden frame.

Step 7: Test the Charging Station

Test the charging station by plugging it in and charging one controller. It should be working accordingly.

What Are the Benefits of a DIY PS5 Controller Charging Station?

Here are some of the benefits that you can reap by building your DIY PS5 controller charging station:

• Cost-effective compared to buying a factory-made charging station
• You get to customize the color and design
• It saves time because you can charge two controllers at once
• You are assured of the materials used to make the charging station

The Bottom Line

Building your DIY PS5 controller charging station is a fun and easy project that you can do yourself. It's cost-effective, saves time, and allows you to customize the color and design. With this guide, we hope that you will enjoy the process and result in an excellent charging station for your PS5 controllers. So what are you waiting for? Take out those tools and get started!"